The quick answer
The Smart TV route starts with your home connection. Register its current public IP using your USip credentials, then follow the DNS instructions for your TV. Allow up to 15 minutes for changes and test the actual streaming app. Your TV model and the service you want to watch both matter.
1. Identify where the streaming app runs
A TV brand is only the starting point. Note the full model, approximate year and operating system, then check whether you open the streaming app on the TV itself or on a box connected by HDMI. That tells you which device needs the setup.
If you use an external player, start with our Apple TV guide or Fire TV guide. Changing the television’s network settings does not automatically configure a separately connected player.
Check that your intended app is available for your model and market. DNS settings do not install an app, add a streaming subscription or change the account attached to it.
2. Register the connection the TV will use
USip’s DNS setup overview begins with registration of your current public IP. Use a computer or phone connected through the same router as the TV. A phone using mobile data would represent a different connection.
After successful signup, your USip login details and instructions arrive in the account email. Use those credentials in the existing registration step. This associates the connection you are setting up with your USip access; it is separate from signing into a streaming app.
Keep the live wizard open as you proceed. It provides the current primary DNS value and the rule for the secondary field. Follow those values exactly rather than substituting a public resolver suggested in a general internet troubleshooting article.
- Connect the registration device and TV through the same router.
- Register the current public IP with your emailed USip credentials.
- Continue to the TV instructions and use the DNS values supplied there.
3. Open the guide for your TV brand
The USip Smart TV selector offers the following brand guides. Complete the registration step first; these links help you find the device-specific settings afterwards.
Menus can differ within the same brand. Samsung’s network guidance documents manual DNS with different menu paths on some models. LG’s instructions distinguish webOS generations and wired versus wireless settings. Their example DNS servers are for general troubleshooting; use the values from USip for this setup. For Samsung-specific model, app and menu checks, read our Samsung Smart TV setup guide. For LG models, see our LG Smart TV setup guide.
If your screen does not match the guide, ask USip support about your exact model and software version. A listed brand is not confirmation that every TV it has sold uses identical settings.
4. Allow activation time, then test playback
Save the changes and follow the restart steps for your device. USip advises allowing up to 15 minutes for changes to take effect. Then open your intended streaming app and try a title included in your account. Loading the app’s home screen is not the same as playing a video.
Our IPv4 checker reports the address used for its own lookup request. It is useful connection information, but it does not establish that a DNS setup is routing every request from your TV. Test the service you actually want to watch.
If your ISP changes your public IP, USip’s completion guidance tells you to register the new address. If playback still fails, record the error and follow US IP, but streaming still blocked to separate routing, account and app issues.
5. Match the plan to your service and device
Choose the streaming service below to explore the Residential US IP offer. You should already know which device plays it and whether its DNS menu matches the setup guide. After subscribing, continue with the credentials and instructions sent by email.
If the TV cannot use the documented route, ask USip whether a router setup fits your exact router model and firmware before buying hardware or changing the whole network. Confirm the supported option rather than assuming every router can provide it.
A US connection addresses the network part of the setup. The streaming service still controls account access, title availability and playback. Use the service-specific checks when the error points to one of those requirements.
Your next step
Choose a Residential US IP for your Smart TV.
Select your streaming service to see its USip offer. After subscribing, your login and setup instructions arrive by email. Continue with the existing DNS wizard for your device.
Quick questions
Do I need a VPN app on my Smart TV?
USip provides a DNS setup path for the listed TV brands. Check the guide against your exact model. An external Apple TV or Fire TV player needs its own device assessment.
Do I register the TV's private network address?
The USip DNS registration step uses the connection’s public IP. Complete it from a device on the same router as the TV, using your USip credentials.
What if it stops working after my home IP changes?
Return to the USip registration step, register the current public IP. Then test the streaming app again.
Sources
USip setup instructions and manufacturer documentation reviewed on September 24, 2026. This guide explains the setup process; it is not a hands-on playback test of every TV model or streaming service.